Home > Product > Welding Pipe > ERW Steel Pipe

Product Categories

Contact Information

  • Cangzhou Steel Pipe Group (CSPG) Co., Ltd.
  • ADD:No.92 Jiefang East Rd., Cangzhou City, Hebei Province, China
  • TEL:+86-31-75673271
  • MOBILE:+8615373302068
  • E-MAIL:ella@cnspipe.com
  • Carbon Steel ERW IBR Pipe

    High quality Erw Welded Type chrome plated furniture tubes 50mm astm a572 gr.50 carbon welded steel pipe Fixed Length Carbon Steel Seamless IBR Pipes & Tubes. Approved under the India Boiler Regulation Act along with the form 3A/3D. ASTM A 106 Gr. B, IBR LT Seamless Pipe, ASTM A 333 Gr.6...
    Product Details:

    High quality Erw Welded Type chrome plated furniture tubes 50mm astm a572 gr. 50 carbon welded steel pipe


    Item

    china supplier ERW carbon welded steel pipe gas and oiled pipe

    ERW Welded   Steel Pipe

    Size: OD: 219---2220mm WT:4 -- 18mm

    Length: 5.8- 12m
    Steel material: Q235, 20#, Q345A53B, A106B, API 5L B,X42,X46,
    X52,X60,   X65ST37.0,ST35.8,St37.2,St35.4/8,St42,St45,St52,St52.4
    STP G38,STP G42,STPT42,STB42,STS42,STPT49,STS49
    Standard: ASTM A53, A106, API 5L, ASME B36.10M-1996
    DIN1626, DIN1629, DIN17175, DIN 2448
    JIS G3452,JIS G3454,JIS G3455,JIS G3456,JIS G3457,JIS G3461

    Surface

    Galvanized or black painting.etc

    Shape

    Round/Square/Rectangle

    Packing

    1. Bundle packing.

    2. Bevel end or plain end or as per buyer's required.
    3. Marking: as per customer's requests.
    4. Painting varnish coating on the pipe.
    5. Plastic caps at ends.

    Payment Term

    T/T, Irrevocable L/C at sight

    Trade Term

    FOB , CFR , CIF.etc



    Fixed Length Carbon Steel Seamless IBR Pipes & Tubes.
    Approved under the India Boiler Regulation Act along with the form 3A/3D.
    ASTM A 106 Gr. B , IBR
    LT Seamless Pipe , ASTM A 333 Gr.6
    Carbon Steel Seamless Boiler Tube IBR BS 3059
    Part II / CDS / 360, BS / 3059/ Part II / HFS / 360
    ASTM A 210 Din 17175 St 35.8
    Heat Exchanger Tube ASTM A 179
    API Line Pipes API 5L Gr. B / PSL Gr x 52
    ERW Boiler Tubes IBR BS 3059 / Part I – 320
    Size Range : 6 mm NB To 24' NB
    Thickness : SCH 40, SCH 80, SCH 160, SCH XXS
    length : 6 mtr & Double random Length

    The steel shall be killed steel, with the primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining. If secondary melting, using electroslag remelting or vacuum-arc remelting is subsequently employed, the heat shall be defined as all of the ingots remelted from a single primary heat.


    4.2 Steel cast in ingots or strand cast is permissible. When steels of different grades are sequentially strand cast, identification of the resultant transition material is required. The producer shall remove the transition material by any established procedure that positively separates the grades.

    4.3 For pipe NPS 11⁄2 and under, it shall be permissible to furnish hot finished or cold drawn.


    4.4 Unless otherwise specified, pipe NPS 2 and over shall be furnished hot finished. When agreed upon between the manufacturer and the purchaser, it is permissible to furnish colddrawn pipe.

    Hot-finished pipe need not be heat treated. Cold-drawn pipe shall be heat treated after the final cold draw pass at a temperature of 1200°F (650°C) or higher. 

    Weight—The weight of any length of pipe shall not vary more than 10 % over and 3.5 % under that specified. Unless otherwise agreed upon between the manufacturer and the purchaser, pipe in NPS 4 and smaller may be weighed in convenient lots; pipe larger than NPS 4 shall be weighed separately.

    16.2 Diameter—The tolerances for diameter shall be in accordance with the following:
    16.2.1 Except for pipe ordered as special outside diameter tolerance pipe or as inside diameter tolerance pipe, variations in outside diameter shall not exceed those prescribed in Table 5.

    16.2.2 For pipe over 10 in. (254 mm) OD ordered as special outside diameter tolerance pipe, the outside diameter shall not vary more than 1 % over or 1 % under the specified outside diameter.


    16.2.3 For pipe over 10 in. (254 mm) ID ordered as inside diameter tolerance pipe, the inside diameter shall not vary more than 1 % over or 1 % under the specified inside diameter.

    16.3 Thickness—The minimum wall thickness at any point shall not be more than 12.5 % under the nominal wall thickness specified.

    We are Manufacturer, Stockist, Dealer, Trader, Supplier, Exporter and Vendor of Fixed Length Carbon Steel Seamless IBR Pipes in Bombay/Mumbai. Carbon Steel IBR Pipes & Tubes. Supplier Stockiest Mumbai

    Approved under the India Boiler Regulation Act along with the form 3A/3D.

    · ASTM A 106 Gr. B , IBR

    · LT Seamless Pipe , ASTM A 333 Gr.6

    · Carbon Steel Seamless Boiler Tube IBR BS 3059

    · Part II / CDS / 360, BS / 3059/ Part II / HFS / 360

    · ASTM A 210 Din 17175 St 35.8

    · Heat Exchanger Tube ASTM A 179

    · API Line Pipes API 5L Gr. B / PSL Gr x 52

    · ERW Boiler Tubes IBR BS 3059 / Part I – 320

    · Size Range : 6 mm NB To 24' NB

    · Thickness : SCH 40, SCH 80, SCH 160, SCH XXS

    · Length : 6 mtr & Double random Length


    The steel shall be killed steel, with the primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining. If secondary melting, using electro slag remelting or vacuum-arc remelting is subsequently employed, the heat shall be defined as all of the ingots remelted from a single primary heat.


    4.2 Steel cast in ingots or strand cast is permissible. When steels of different grades are sequentially strand cast, identification of the resultant transition material is required. The producer shall remove the transition material by any established procedure that positively separates the grades.


    4.3 For pipe NPS 11⁄2 and under, it shall be permissible to furnish hot finished or cold drawn.


    4.4 Unless otherwise specified, pipe NPS 2 and over shall be furnished hot finished. When agreed upon between the manufacturer and the purchaser, it is permissible to furnish cold drawn pipe.

    Hot-finished pipe need not be heat treated. Cold-drawn pipe shall be heat treated after the final cold draw pass at a temperature of 1200°F (650°C) or higher. 

    Weight—The weight of any length of pipe shall not vary more than 10 % over and 3.5 % under that specified. Unless otherwise agreed upon between the manufacturer and the purchaser, pipe in NPS 4 and smaller may be weighed in convenient lots; pipe larger than NPS 4 shall be weighed separately.

    16.2 Diameter—The tolerances for diameter shall be in accordance with the following:

    16.2.1 Except for pipe ordered as special outside diameter tolerance pipe or as inside diameter tolerance pipe, variations in outside diameter shall not exceed those prescribed in Table 5.

    16.2.2 For pipe over 10 in. (254 mm) OD ordered as special outside diameter tolerance pipe, the outside diameter shall not vary more than 1 % over or 1 % under the specified outside diameter.

    16.2.3 For pipe over 10 in. (254 mm) ID ordered as inside diameter tolerance pipe, the inside diameter shall not vary more than 1 % over or 1 % under the specified inside diameter.

    16.3 Thickness—The minimum wall thickness at any point shall not be more than 12.5 % under the nominal wall thickness specified.


    Hot Tags: carbon steel ERW ibr pipe, China, suppliers, manufacturers, factory
    Related Products
    Feedback: